1. This product should use DOT3 or above DOT4 brake oil, other mineral oil or solvent is strictly prohibited.
2. Before braking, the air in the braking body should be completely removed.
A. First, loosen the vent bolt and put on the transparent hose.
B. The oil pressure is operated at a small pressure (to prevent the brake oil from entering the oil pressure quickly) until the brake oil is filled with the oil pressure cylinder, and
Flow to the transparent rubber hose, it is necessary to ensure that there are no bubbles in the tube.
C. Then lock the exhaust bolt and remove the transparent hose.

3. The brake fluid shall be kept in sufficient oil at all times, and shall not be mixed with other mineral oil for use, and shall be replaced periodically.
4. Brake fluid is soluble to general paint, the paint surface should be wiped clean immediately after being stained with brake fluid.
5. When the braking friction and wear reaches the thickness of 10mm, it should be replaced immediately to avoid affecting the braking effect.